Sipcon was established in 1971 as industrial division of GETNER Group - Sipconn offers a comprehensive and superior lineup of quality profile projectors , vision measuring systems, industrial vision inspection solutions and co-ordinate measuring machines.
S.No. | Specifications | SPN-300 |
1 | Screen | 300mm |
1.1 | Standard - Opaque glass screen with 90 degree cross line, Fitted on rotary ring operated by knob. | |
1.2 | Optional - Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: ±360 deg Abs. Inc, zero setting. | |
2 | CO-AXIAL OPTICS WITH BUILT IN HALF REFLECTIVE MIRROR | |
2.1 | Standard | 10X, 20X |
2.2 | Optional | 50X / 100X |
2.3 | Mount | Turret mount with click stop |
3 | WORKSTAGE SIZE | 250 x 250mm |
4 | MEASURING RANGE | 100 x 100mm |
5 | LINEAR MEASUREMENTS | With QC-200 or PC based software |
6 | FOCUSING | 100mm |
7.1 | PROJECTION ACCURACY Contour | ±0.05% |
7.2 | Surface | ±0.075% |
8 | ILLUMINATION | |
8.1 | Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provides light as per objective. | |
8.2 | Surface: 24 V / 150 W Halogen lamp provides shadowless light on optical axis | |
9 | STAND: Unique rigid pedestal system facilities vibration free handling of component | |
10 | COOLING SYSTEM | FAN |
11 | OPTIONAL HARDWARE | OPTIONAL SOFTWARE |
Motorised X,Y and focusing with speed control | Dia View: D.R.O. system with L.C. 0.001/0.005 mm. | |
Workstage for D.R.O.: Travel 150 x150mm / 200 x100mm / 200 x150mm / 200 x 200mm | QC220 : Geometrical readout System, opto Edge Sensor | |
Profile charts, Rotary table, V-block, Centre holding device opto Edge Sensor for accurate measurement | QC5000/ SIPMEAS : PC based geometrical readout System, with graphical representation. Simple CAD interface. |
S.No. | Specifications | SH-300 | SH-400 | SH-600 / 800 |
1 | Screen | 300mm | 400mm | 600 / 800 mm |
1.1 | Standard : Opaque glass screen with 90 degree cross line, Fitted on rotary ring operated by knob. | |||
1.2 | Optional : Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: 360 deg Abs. Inc, zero setting. | |||
2 | OPTICS | |||
2.1 | Standard | 10X, 20X, 100X | 10X, 20X | 10X, 20X |
2.2 | Optional | 50X | 25X, 50X, 100X | 25X, 50X, 100X |
2.3 | Mount | Turret Mount with click stop | ||
3 | WORKSTAGE SIZE | 400 x 150mm | 450 x 200mm | 500 x 200mm |
4 | MEASURING RANGE | 200 x 100mm | 300 x 100mm | 300 x 150mm |
6 | FOCUSING | 75mm | 100mm | 100mm |
7 | HELIX ANGLE | ± 12 Degree | ||
8 | MEASURING SYSTEM | Built In glass scale with D.R.O | ||
9.1 | PROJECTION ACCURACY Contour | ±0.05% | ±0.05% | ±0.05% |
9.2 | Surface | ±0.075% | ±0.075% | ±0.075% |
9 | ILLUMINATION | |||
10.1 | Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provide light as per objective. | |||
10.2 | Surface:24 V / 150 W Halogen lamp provides shadowless light on optical axis | |||
11 | STAND: Unique rigid pedestal system facilities vibration free handling of component | |||
12 | CONDENSOR | Two adjustable condensor unit fitted on turret | ||
13 | COOLING SYSTEM | FAN | ||
OPTIONAL HARDWARE | OPTIONAL SOFTWARE | |||
Motorised X,Y and focusing with speed control | Dia View: D.R.O system with L.C. 0.001 / 0.005 mm | |||
Workstage for bigger sizes also available. | QC220 : Geometrical readout System, opto Edge Sensor | |||
Profile charts, Rotary table, V-block, Centre holding device opto Edge Sensor for accurate measurement | QC5000/SIPMEAS : PC based geometrical readout System, with graphical representation. Simple CAD interface. |
S.No. | Specifications | SV-300 | SV-400 | SV-600/800 |
1 | Screen | 300mm | 400mm | 600mm/800mm |
1.1 | Standard : Opaque glass screen with 90 degree cross line Fitted on rotary ring operated by knob. | |||
1.2 | Optional : Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: 360 deg Abs. Inc, zero setting. | |||
2 | OPTICS | |||
2.1 | Standard | 10X | 10X, 20X | 10X, 20X |
2.2 | Optional | 20X, 50X, 100X | 25X, 50X, 100X | 25X, 50X, 100X |
2.3 | Mount | Screw Mount | Turret mount with click stop | |
3 | WORKSTAGE SIZE | 160 x 160mm | 200 x 200mm | 200 x 200mm |
4 | MEASURING RANGE | 50 x 50mm | 75 x 75mm | 75 x 75mm |
5 | LINEAR MEASUREMENT | 0-25mm Micrometer L.C. 0.001 mm | 0-50mm zero adjustment Micrometer L.C. 0.001 mm | |
6 | FOCUSING | 100mm | 100mm | 100mm |
7.1 | PROJECTION ACCURACY Contour | ±0.05% | ±0.05% | ±0.05% |
7.2 | Surface | ±0.075% | ±0.075% | ±0.075% |
8 | ILLUMINATION | |||
8.1 | Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provide light as per objective. | |||
8.2 | Surface: 24 V / 150 W Halogen lamp provides shadowless light on optical axis | |||
9 | STAND: Unique rigid pedestal system facilitates vibration free handling of component | |||
10 | COOLING SYSTEM | FAN | ||
11 | OPTIONAL HARDWARE | OPTIONAL SOFTWARE | ||
Motorised X,Y and focusing with speed control | Dia View: D.R.O system with L.C. 0.001/0.005 mm | |||
Workstage for D.R.O.: Travel 150 x150mm / 200 x100mm / 200 x150mm / 200 x 200mm | QC220: Geometrical readout System, opto Edge Sensor | |||
Profile charts, Rotary table, V-block, Centre holding device opto Edge Sensor for accurate measurement | QC5000/SIPMEAS: PC based geometrical readout System, with graphical representation. Simple CAD interface. |
S.No. | Specifications | SP-250 | SP-300 | SP-400 |
1 | Screen | 250mm | 300mm | 400mm |
1.1 | Standard : Opaque glass screen with 90 degree cross line, Fitted on rotary ring operated by knob. | |||
1.2 | Optional : Electronic Protractor switchable degree / decimal .01 deg / 1min. Display Range: ± 360 deg Abs. Inc, zero setting. | |||
2 | OPTICS Standard | 10X | 10X, 20X, 100X | 10X, 20X |
2.2 | Optional | 20X, 50X, 100X | 50X | 25X, 50X, 100X, |
2.3 | Mount | Screw Mount | Turret mount with click stop | |
3 | WORKSTAGE SIZE | 160 x 160mm | 160 x 160mm | 200 x 200mm |
4. | MEASURING RANGE | 50 x 50mm | 50 x 50mm | 75 x 75mm |
5 | LINEAR MEASUREMENTS | 0-25mm Micro meter L.C. 0.001mm | 0-50mm Micrometer head with zero adjustment L.C. 0.001mm | |
6 | FOCUSING | 100mm | 100mm | 100mm |
7.1 | PROJECTION ACCURACY Contour | ±0.05% | ±0.05% | ±0.05% |
7.2 | Surface | ±0.075% | ±0.075% | ±0.075% |
8 | ILLUMINATION | |||
8.1 | Contour: 24 V/150 W halogen lamp with illumination control. Built-in condenser unit provide light as per objective. | |||
8.2 | Surface: 24 V / 150 W Halogen lamp provides shadowless light on optical axis | |||
9 | STAND: Unique rigid pedestal system facilitates vibration free handling of component | |||
10 | COOLING SYSTEM | FAN | ||
11 | OPTIONAL HARDWARE | OPTIONAL SOFTWARE | ||
Motorised X,Y and focusing with speed control | Dia View: D.R.O system with L.C. 0.001 /0.005 mm | |||
Workstage for D.R.O.: Travel 100 x100mm / 150 x150mm / 200 x100mm / 200 x 150mm/ 200 x 200mm | QC220 : Geometrical readout System, opto Edge Sensor | |||
Profile charts, Rotary table, V-block, Centre holding device opto Edge Sensor for accurate measurement | QC5000/SIPMEAS : PC based geometrical readout System, with graphical representation. Simple CAD interface. |
Tool inspector is used for the measurement of Drilling side milling cutter, end mill and special cutter.
Available in both manual and CNC versions. Fully versatile high precision measuring microscope.